1.Dual use  :

1). This case support to install 3.5 inch touchscreen , and need to remove the cover board and fan in this using way. ( Youcan notinstall the 3.5 inch screen and fan at the same time )

2). When you don't use the 3.5 inch touchscreen , it is a general case with cooling fan.

2.Full access for Raspberry Pi :

We leave every hole for memory card , HDMI-compatible , AV , Ethernet , USB , POE , Camera , MIPI DSI ports.

3.Support cooling fan :

You can install the cooling fan on the cover board , which make the best heat dissipation and extend the using life of Raspberry Pi.(Youcan notinstall the 3.5 inch screen and fan at the same time)

4.Hange hole on the bottom :

We make 2 hole on the bottom so that you can hange the case on the wall or something else . This design is very convenient when using the 3.5 inch touchscreen.

5.Multiple colors available :

There are Black color to chose for the case .

6.About the pad- use to support the screen

1). Install the Raspberry Pi on the base board1). Install the Raspberry Pi on the base board

2). Please stick the pad on  the back of 3.5 inch touchscreen ( as the picture show ) , then insert the 3.5 inch touchscreen on Raspberry Pi by GPIO pin correctly ( don't be malposed )

3). Install the cover board

Step 1：Download the Raspbian IMG

https://www.raspberrypi.org/downloads/raspbian/

Step 2:Burn the system image

If you don't know how to do that,you can refer to theRaspberry Pi office tutorial

Step 3:Open terminal(SSH) and install the driver on RaspberryPi

(tested on RaspberryPi 3B+,3B,2B,2B+,1B,ZERO)

Run:

sudo rm -rf LCD-show
git clonehttps://github.com/goodtft/LCD-show.gitchmod -R 755 LCD-show
cd LCD-show/
sudo ./MHS35-show